SPOT THE SAFETY VIOLATION: Is This a Safe Lifting Technique?

0
149

Is this the way you want workers to lift materials?

Click for Answer

Many workers lift, carry, move or otherwise handle various materials by hand as part of their every day duties. But if they don’t do so correctly, they’re at risk of getting hurt. For example, lifting heavy objects manually can cause musculoskeletal injuries (MSIs), such as shoulder sprains. This picture is a good example of how not to lift materials. Instead of bending over and risking a back strain, the worker should squat down and lift the case of water with his legs.

7 MSI RISK FACTORS

The MSI risk factors when manually lifting or moving materials include:

1. The Object’s Weight

 

 

The heavier the object, the greater the energy needed to lift and move it and the higher the MSI risk.

2. The Object’s Weight Distribution & Shape

Moving lighter objects might present a high risk of MSIs if the object’s shape or bulkiness makes it hard or awkward to lift and carry.

3. Horizontal Distance of Load from the Body

The horizontal distance of the load away from the body means the distance from the low back to the hands when handling on object in front of the body. The further the object is from the body, the greater the risk of an MSI.

4. The Object’s Vertical Location

Vertical location means where the object’s located in relation to the floor before, during and at the end of the lifting process. Lifting an object from or to a high level can pose an MSI risk.

5. How Long/Often You Handle the Object

Lifting and moving objects involves a greater risk of MSIs when you do it repeatedly over a frequent or sustained period.

6. Your Lifting Posture

Bending the back and leaning forward—like the worker in the photo—puts major stress on your spine; bending your knees and using your legs to lift significantly reduces that stress.

7. Your Grip

In addition to increasing the risks of dropping the object, a poor grip reduces the amount of weight you can safely carry.

TAKE 5 STEPS TO PROTECT WORKERS

To protect workers when manually moving materials and to comply with the OHS laws, take these five steps:

1)      Determine whether materials can be moved mechanically;

2)      If not, assess the risks of moving the materials manually (use this checklist);

3)      Adapt the materials to eliminate or reduce any risks to workers;

4)      Develop methods for safely lifting and moving materials; and

5)      Train workers on these safe work practices, such as the so-called “freestyle technique” discussed below.

According to information from Alberta, researchers now advocate a “freestyle technique” when lifting materials that protects workers as long as they follow these basic principles:

Keep the natural curve in the lower back. When standing straight, the lower back naturally curves to create a slight hollow. Always try to maintain this curve when lifting, lowering or moving objects. The spine and back are their most stable in this position.

Contract the abdominal muscles. By contracting the abdominal muscles when lifting, lowering or moving materials, you improve the spine’s stability. Sometimes described as “bracing,” tightening the abs even slightly reduces the likelihood of injury.

Avoid twisting. Twisting the back can make it less stable, increasing the likelihood of injury. Bracing helps reduce any tendency to twist.

Hold materials close. Keep the materials as close to the belly button and body as possible. Doing so reduces the strain on muscles in the back and trunk. If necessary, protective clothing such as leather aprons should be used so that sharp, dirty, hot or cold objects can be held as close to the body as possible.

 

Go to Safety Smart S.A.F.E. System to buy a system on Lifting Safety and Back Injuries, which includes safety posters, a safety meeting outline, table tents, safety cards for workers and quizzes.

And for a video on preventing back injuries and safety talks on safe lifting, go to Safety Smart. Not a subscriber? Sign up for a free trial.